Labrico Iron Series
The profound and goodness of "wood x iron" complements the space and matches various places and styles.
[Product dimensions]
Width 8.6 x depth 2.3 x height [upper cap] 10-12.2 [lower cap] 0.5cm
[Used load]
・ If the load is applied to the pillar, the load is applied to 10 kg. There is a risk of falling. (Including the weight of the shelf when using a shelf)
・ The usage load is an experimental value. It is not guaranteed because the conditions change depending on the installation location and the wood used.
[Notes on mounting]
・ This product is exclusively indoors.
・ This product is intended to be attached to 1x4 materials (19 x 89mm) on the market and stretched on the floor and ceiling.
・ Please prepare 1 × 4 materials with 75 mm shorter from the height of the ceiling.
・ Use the size to 1850mm in the vertical direction.
・ If the 1x4 used material is warped or bent, it may not be possible to install or install it normally.
・ Please install it in a solid place. Installation in a weak base may cause falling or damage to the ceiling.
・ Do not install on the sloping ceiling or floor. Also install it vertically with the floor.
・ This product is a product that assumes the height of the ceiling of ordinary households.
・ It is exclusively for vertical clock. Do not use it sideways.
・ Do not use in high temperatures, outdoors, direct sunlight, bathrooms, high humid places, or water.
・ Because it may fall, do not apply bicycles, TVs, or valuables.
[Precautions for use]
・ Do not climb or hang.
・ Do not list dangerous goods, valuables, or damage that may be damaged.
・ Adhesion of deodorant, air freshener, cosmetics, hairdressing, acidic detergent, alkaline detergent, oil and fat (benzine, thinner, etc.) may cause deterioration. Please remove it immediately.
・ If abnormalities such as damage or cracks occur, do not use immediately.
・ We cannot do any force majeure such as natural disasters, aging, remodeling, failure due to incorrect use, damage, accidents, etc. cannot be used.
・ Products brought outside Japan are not covered by compensation.
[Set contents] 1 set of adjuster, 4 screws, pads, instruction manuals [Used load] 10kg (if a load is applied to the pillar) [Color] White
[Corresponding wood] 1x4 wood [mounting dimension] Up to 1850mm in height [Estimated wood cut] Please prepare 75mm shorter wood from the height of the ceiling.
[Material] Iron / Epoxy resin powder paint Synthetic rubber Iron / plating + baking paint
Indoor only. It cannot be used in high temperatures, outdoors, direct sunlight, bathrooms, high humid places, and water.
Made of Iron with a simple and rigid design. Even DIY beginners can easily attach with a plus driver and the included screw.